Ahuja High Wattage PA Mixer Amplifiers
•6 Mic & 2 Aux Inputs.
•Built-in digital effect processor for 2 Mic Inputs.
•Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
•Line Input for connecting the output from any external mixer or permitting SSA-250®M to be used as a Booster Power Amplifier.
•Resettable circuit breaker for protection against overload and short circuit. Instant transfer to DC power (Car Battery) if AC power fails.
•Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
Power Output | 300W Max., 250W RMS at 10% THD 220W RMS at 5% THD, 200W RMS at 2% THD |
Output Regulation | ≤ 2 dB, no load to full load at 1kHz |
Input Channels | 6×Mic 0.65mV/4.7kΩ, 2×Aux 100mV/470 kΩ, 1 × Line 1V/50kΩ |
Delay System | Digital Signal Processing |
Delay Range Setting | 60-300ms |
Frequency Response | 50-15,000Hz ±3dB |
Signal to Noise Ratio | 60dB |
Tone Controls | Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz |
Outputs | Preamp 200mV/600Ω, Line 1V/1kΩ |
Speaker Outputs | 4Ω, 8Ω, 70V & 100V |
Power Supply | AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery) |
Power Consumption | AC: 460VA DC: 6A |
Dimensions | W450 × H160 × D340 mm |
Weight | 15.70kg |