Community VOICE-RANGE HORN SYSTEM WITH INTERNAL AUTOFORMER SWIVEL YOKE BRACKET INCLUDED
•2-inch (51 mm) throat exit M200 driver
•Low distortion, high efficiency
•High power output
•Non-metallic diaphragm
•Factory-installed autoformer for 70V/100V applications
•Swivel yoke bracket included
•Highly resistant to harsh environments, IP65 rating
Loudspeaker Type: Voice-range horn system Operating
Range: 400 Hz to 8 Khz 500 Hz to 4 kHz (±3 dB)
Max Input Ratings: 75 / 38 / 19 / 9 watt autoformer taps @ 70v
Sensitivity (1W/1m): 114 dB SPL (400 Hz to 4 kHz 1/3 octave bands)
Maximum Output: 133 dB SPL / 140 dB SPL (peak)
Nominal Impedance: 72 ohms (75W tap @ 70V)
Minimum Impedance: 70.5 ohms @ 1.8 kHz (75W tap @ 70V) Nominal –6dB Beamwidth: 50°H (+-4° / -9°, 2 kHz to 4 kHz) 40°V (+10° / -10°, 2 kHz to 4 kHz) Axial Q / DI: 35 / 15.4, 2 kHz to 4 kHz
Crossover Frequency: No internal crossover Recommended Signal Processing: 400 Hz high pass filter 24dB / Oct.
Drivers: MF 1 x M200, Ferrofluid-cooled
Driver Protection: None Input
Connection: 18 gauge, 5 conductor, 12 foot SJOW cable through gland nut
Controls: None
Enclosure: Fiberglass Enclosure
Hardware: None
Mounting/Rigging Provisions: (4) 1/4” holes at the corners of the horn mouth
Grille: None E
nvironmental Performance: IEC529 IP66W rating with a minimum 5-degree downward aiming angle
Required Accessories: 400 Hz high pass filter 24 dB / Oct.
Supplied Accessories: Swivel yoke bracket
Optional Accessories: System controller
Dimensions—Height:
Width (front):
Width (rear):
Depth: 9.75 inches (248 mm) 17.63 inches (448 mm) 10.5 inches (267 mm) 25 inches (635 mm)
Weight (with bracket): 24.3 lbs (11 kg)
Shipping Weight: 30 lbs (13.6 kg)